GEK-113032A W650 Wind Generator Protection System 6-276 ACTUAL VALUES 6.3 METERING66.3.1.4 ENERGYActual> Metering > Primary Values > EnergyEnergy is only given in three phase primary valuesTable 6–33: ENERGY PRIMARY VALUESWhen the energy counters reach the value (2ˆ 31)/1000 (approximately. 2147 MVArh and MWh) all the values are set tozero and starts counting again.6.3.1.5 DEMANDActual> Metering > Primary Values > DemandDemand is only given in primary valuesTable 6–34: DEMAND PRIMARY VALUESDESCRIPTION UNITSPositive MWatthour MWhNegative MWatthour MWhPositive MVarhour MVArhNegative MVarhour MVArhPos Mwatthour Cnt MWhNeg Mwatthour Cnt MWhPos MVarhour Cnt MVArhNeg MVarhour Cnt MVArhDESCRIPTION UNITSDEMAND IA KADEMAND IA MAX KADEMAND IA DATE dd/mm/yy hh:mm:ss:msDEMAND IB KADEMAND IB MAX KADEMAND IB DATE dd/mm/yy hh:mm:ss:msDEMAND IC KADEMAND IC MAX KADEMAND IC DATE dd/mm/yy hh:mm:ss:msDEMAND IG KADEMAND IG MAX KADEMAND IG DATE dd/mm/yy hh:mm:ss:msDEMAND ISG KADEMAND ISG MAX KADEMAND ISG DATE dd/mm/yy hh:mm:ss:msDEMAND I2 KADEMAND I2 MAX KADEMAND I2 DATE dd/mm/yy hh:mm:ss:msDEMAND W MWDEMAND W MAX MWDEMAND W DATE dd/mm/yy hh:mm:ss:msDEMAND VAR PWR MVArDEMAND VAR MAX MVArDEMAND VAR DATE dd/mm/yy hh:mm:ss:msDEMAND VA PWR MVADEMAND VA MAX MVADEMAND VA DATE dd/mm/yy hh:mm:ss:ms
