GEK-113032A W650 Wind Generator Protection System C-9APPENDIX C C.3 IMPLEMENTATION TABLECc) IMPLEMENTATION TABLE (SHEET 3 OUT OF 3)Note 1: A default variation refers to the variation responded when variation 0 is requested and/or in class 0, 1, 2, or 3 scans.Note 2: For static (non-change-event) objects, qualifiers 17 or 28 are only responded when a request is sent with qualifiers 17 or 28,respectively. Otherwise, static object requests sent with qualifiers 00, 01, 06, 07, or 08, will be responded with qualifiers 00 or 01(for change-event objects, qualifiers 17 or 28 are always responded).Note 3: Cold restarts are implemented the same as warm restarts – The W650 is not restarted, but the DNP process is restarted.OBJECT REQUEST RESPONSEObjectNo.VariationNo. Description Function Codes(dec)Qualifier Codes(hex) Function Codes Qualifier Codes(hex)34 232-Bit Analog Input ReportingDeadbandSee Note 12 (write)00,01 (start-stop)07,08 (limited qty)17,28 (index)50 0 Time and Date - All Variations 1 (read)00,01 (start-stop)06 (no range, or all)07,08 (limited qty)17,28 (index)129 (response)00,01 (start-stop)17,28 (index)See Note 250 1 Time and DateSee Note 11 (read)2 (write)00,01 (start-stop)06 (no range, or all)07 (limited qty=1)08 (limited qty)17,28 (index)129 (response)00,01 (start-stop)17,28 (index)See Note 252 2 Time Delay Fine1 (read)2 (write) 129 (response) 07 (limited qty)quantity=160 0 Class 0, 1, 2, and 3 Data1 (read)20 (enable unsol)21 (disable unsol)22 (assign class)06 (no range, or all)60 1 Class 0 Data 06 (no range, or all)60 2 Class 1 Data1 (read)20 (enable unsol)21 (disable unsol)22 (assign class)06 (no range, or all)07,08 (limited qty)60 3 Class 2 Data1 (read)20 (enable unsol)21 (disable unsol)22 (assign class)06 (no range, or all)07,08 (limited qty)60 4 Class 3 Data1 (read)20 (enable unsol)21 (disable unsol)22 (assign class)06 (no range, or all)07,08 (limited qty)80 1 Internal Indications 2 (write) 00 (start-stop)(index must =7)No Object (function code only)See Note 3 13 (cold restart)No Object (function code only) 14 (warm restart)No Object (function code only) 23 (delay meas.)
