4 - 2 Genie Z-45/22 Part No. 32960Service Manual - Second EditionSection 4 - Scheduled Maintenance ProceduresA-1Inspect the ManualsMaintaining the Operator's and Safety manuals ingood condition is essential to safe machineoperation. Manuals are included with eachmachine and should be stored in the box providedin the platform. An illegible or missing manual willnot provide safety and operational informationnecessary for a safe operating condition.1 Check to be sure that the storage container ispresent and in good condition.2 Check to make sure that the operator's,responsibilities and safety manuals are presentand complete in the storage container in theplatform.3 Examine the pages of each manual to be surethat they are legible and in good condition.4 Always return the manuals to the storagecontainer after use.Contact your Genie distributor orGenie Industries if replacementmanuals are needed.2 Inspect all decals for damage or illegibility.Replace any illegible decal immediately.Contact your Genie distributor orGenie Industries if replacementdecals are needed.A-2Inspect theDecals and PlacardsMaintaining all of the safety and instructionaldecals and placards in good condition ismandatory for safe machine operation. Decalsalert operators and ground personnel to the manypossible hazards associated with using thismachine. They also provide users with operationand maintenance information. An illegible decalwill fail to alert personnel of a procedure or hazardand could result in unsafe operating conditions.1 Refer to theDecals section in theGenie Z45/22Operator's Manual and use the decal list andillustrations to determine that all decals andplacards are in place.A-3Inspect for Damage, Loose orMissing PartsDaily machine condition inspections are essentialto safe machine operation and good machineperformance. Failure to locate and repair damage,and discover loose or missing parts may result inan unsafe operating condition.1 Inspect the entire machine for damage andimproperly installed or missing parts including:· electrical components, wiring and electricalcables· hydraulic hoses, fittings, cylinders andmanifolds· fuel and hydraulic tanks· drive and turntable rotation motors and gearboxes· boom components and wear pads· dents or damage to machine· tires and wheels· engine and related components· limit switches, alarms, horns and beacon· nuts, bolts and other fasteners· platform entry mid-rail or gate· cracks in welds or structural components· compartment covers and latchesTable A Procedures800-610-4101ActionRental.com
