4 - 30 Genie Z-45/22 Part No. 32960Service Manual - Second EditionSection 4 - Scheduled Maintenance ProceduresTABLE C PROCEDURESC-7Replace theDrive Loop Hydraulic FilterReplacing the drive loop hydraulic filter is essentialto good machine performance and service life. Adirty or clogged filter may cause the machine toperform poorly and continued use may causecomponent damage. Extremely dirty conditionsmay require that the filter be replaced morefrequently.Beware of hot oil. Contact with hotoil may cause severe burns.Perform this procedure with theengine off.1 Rotate the filter housing counterclockwise andremove the housing.2 Remove the filter element from the housing.3 Inspect the housing seal and replace it ifnecessary.4 Install the new filter (part no. 20880) and handtighten the housing onto the filter head. Cleanup any oil that may have spilled during theinstallation procedure.5 Start the engine from the ground controls.6 Inspect the filter assembly to ensure that thereare no leaks.C-8Replace the Diesel FuelFilter - Deutz Diesel ModelsReplacing the diesel fuel filter is essential to goodengine performance and service life. A dirty orclogged filter may cause the engine to performpoorly and continued use may cause componentdamage. Extremely dirty conditions may requirethat the filter be replaced more often.Engine fuels are combustible.Replace the fuel filter in an open,well-ventilated area away fromheaters, sparks, flames and lightedtobacco. Always have an approvedfire extinguisher within easy reach.Perform this procedure with theengine off.1 Turn the manual fuel shutoff valve, located atthe fuel tank, to the CLOSED position.2 Remove the fuel filter with a filter wrench.a fuel filterb oil filter3 Apply a thin layer of oil or diesel fuel to the newfuel filter gasket.800-610-4101ActionRental.com
