4 - 12 Genie Z-45/22 Part No. 32960Service Manual - Second EditionSection 4 - Scheduled Maintenance ProceduresOil Cooler1 Remove the cover from the side of the engine,then remove the oil cooler top cover.2 Inspect the oil cooler for leaks and physicaldamage.a oil coolerb cylinder head cooling finsc blower fins3 Clean the oil cooler of debris and foreignmaterial.Cooling and Blower Fins4 Inspect the blower fins for physical damage.5 Clean the blower fins of debris and foreignmaterial.6 Inspect the head cooling passages and fins forphysical damage or foreign material, using aflashlight.7 Clean the cylinder head cooling passages ofdebris and foreign material.B-4Check the Exhaust SystemMaintaining the exhaust system is essential togood engine performance and service life.Operating the machine with a damaged or leakingexhaust system can cause component damageand unsafe operating conditions.TABLE B PROCEDURESDo not inspect while the engine isrunning. Remove the key tosecure from operation.Beware of hot enginecomponents. Contact with hotengine components may causesevere burns.1 Be sure that all nuts and bolts are tight.2 Inspect all welds for cracks.3 Inspect for exhaust leaks; i.e., carbon builduparound seams and joints.B-5Check the BatteryThe factory ships each machinewith a sealed battery; checkingthe water level is not necessary. Ifthe battery is replaced withanother type, the battery acidlevel and specific gravity shouldbe checked at this time.Proper battery condition is essential to goodengine performance and operational safety.Improper fluid levels or damaged cables andconnections can result in engine componentdamage and extremely hazardous conditions.Batteries contain acid. Avoidspilling or contacting battery acid.Neutralize battery acid spills withbaking soda and water.1 Put on protective clothing and eye wear ifbatteries are to be opened.2 Be sure that the battery cable connections arefree of corrosion.3 Be sure that the battery hold down and cableconnections are tight.a b c800-610-4101ActionRental.com
