1-9When the voice VLAN is working normally, if the device restarts, in order to make the established voiceconnections work normally, the system does not need to be triggered by the voice traffic to add the portin automatic voice VLAN assignment mode to the local devices but does so immediately after the restartor the changes.Configuring the Voice VLAN to Operate in Manual Voice VLAN AssignmentModeFollow these steps to configure a voice VLAN to operate in manual voice VLAN assignment mode:To do… Use the command… RemarksEnter system view system-view —Set an OUI address that can be identified bythe voice VLANvoice vlan mac-address ouimask oui-mask [ descriptiontext ]OptionalWithout this address, thedefault OUI address isused.Enable the voice VLAN security mode voice vlan security enableOptionalBy default, the voiceVLAN security mode isenabled.Set the voice VLAN aging timer voice vlan aging minutesOptionalThe default aging timer is1,440 minutes.Enable the voice VLAN function globally voice vlan vlan-id enable RequiredEnter port view interface interface-typeinterface-number RequiredEnable voice VLAN on a port voice vlan enableRequiredBy default, voice VLAN isdisabled on a port.Enable the voice VLAN legacy function on theport voice vlan legacyOptionalBy default, voice VLANlegacy is disabled.Set voice VLAN assignment mode on a port tomanual undo voice vlan mode autoRequiredThe default voice VLANassignment mode on aport is automatic.Quit to system view quit —
