1-2z Web authentication can use only a RADIUS authentication scheme; it does not support localauthentication.z The user number limit configured under an AAA scheme does not take effect for Webauthentication. Web authentication does not support accounting. Configure accounting for the AAAscheme as optional.Configuring Web AuthenticationFollow these steps to configure Web authentication:To do… Use the command… RemarksEnter system view system-view —Set the IP address and portnumber of the Web authenticationserverweb-authentication web-serverip ip-address [ port port-number ]RequiredIf no port number is specified, port80 will be used.No Web authentication server isset by default.Enable Web authenticationglobally web-authentication enable RequiredDisabled globally by defaultinterface interface-typeinterface-numberweb-authentication selectmethod { shared | designated |extended }Enable Web authentication on aportquitRequiredDisabled on port by defaultSet a free IP address range thatcan be accessed by users beforeWeb authenticationweb-authentication free-ipip-address { mask-length | mask }OptionalNo such address range by defaultForcibly log out the specified or allusers.web-authentication cutconnection { all | macmac-address | user-nameuser-name | interfaceinterface-type interface-number }OptionalSet the idle user checking intervalfor Web authenticationweb-authentication timeridle-cut timerOptional900 seconds by defaultSet the maximum online time forWeb authentication usersweb-authentication timermax-online timerOptional1800 seconds by defaultSet the maximum number of onlineWeb authentication users on a portweb-authenticationmax-connection numberOptional128 users by default
