2-3Before configuring a Monitor Link group, you must create a Monitor Link group and configure memberports for it. A Monitor Link group consists of an uplink port and one or multiple downlink ports. The uplinkport can be a manually-configured or static LACP link aggregation group, an Ethernet port, or a SmartLink group. The downlink ports can be manually-configured link aggregation groups or static LACP linkaggregation groups, or Ethernet ports.Configuration TasksTable 2-1 Monitor Link configuration tasksTask RemarksCreating a Monitor Link Group RequiredConfiguring the Uplink Port RequiredConfiguring a Downlink Port RequiredCreating a Monitor Link GroupTable 2-2 Create a Monitor Link groupOperation Command RemarksEnter system view system-view —Create a Monitor Link group monitor-link group group-id RequiredConfiguring the Uplink PortTable 2-3 Configure the uplink portOperation Command RemarksEnter system view system-view —Enter the specified Monitor Link group view monitor-link group group-id —Configure the specified linkaggregation group as theuplink port of the MonitorLink grouplink-aggregation groupgroup-id uplinkConfigure theuplink port forthe MonitorLink groupConfigure the specifiedSmart Link group as theuplink port of the MonitorLink groupsmart-link group group-iduplinkRequiredUse any of thethree approaches
