1-11Displaying and Maintaining Voice VLANTo do… Use the command… RemarksDisplay information about the ports on which voice VLANconfiguration fails display voice vlan error-infoDisplay the voice VLAN configuration status display voice vlan statusDisplay the OUI list display voice vlan ouiDisplay the ports operating in the voice VLAN display vlan vlan-idIn any viewVoice VLAN Configuration ExampleVoice VLAN Configuration Example (Automatic Voice VLAN Assignment Mode)Network requirementsCreate a voice VLAN and configure it to operate in automatic voice VLAN assignment mode to enablethe port to which an IP phone is connected to join or exit the voice VLAN automatically and voice trafficto be transmitted within the voice VLAN.z Create VLAN 2 and configure it as the voice VLAN, with the aging timer being 100 minutes.z The IP phone sends tagged packets. It is connected to Ethernet 1/0/1, a hybrid port, with VLAN 6being its default VLAN. Set this port to operate in automatic voice VLAN assignment mode.z You need to add a user-defined OUI address 0011-2200-000, with the mask being ffff-ff00-0000and the description string being “test”.Network diagramFigure 1-2 Network diagram for voice VLAN configuration (automatic voice VLAN assignment mode)InternetDevice AEth1/0/1VLAN2VLAN2010-1001OUI:0011-2200-0000Mask:ffff-ff00-0000Device BConfiguration procedure# Create VLAN 2 and VLAN 6. system-view[DeviceA] vlan 2[DeviceA-vlan2] quit[DeviceA] vlan 6[DeviceA-vlan6] quit
