1-11Configuring MAC Address ReplicationThe contents of this section are only applicable to the S3100-EI series among S3100 series switches.Follow these steps to configure the MAC address replication feature:To do... Use the command... RemarksEnter system view system-view —Enter Ethernet port view interface interface-typeinterface-number —Configure MAC addressreplicationmac-address-mapping indexsource-vlan source-vlan-id-listdestination-vlan dest-vlan-idRequiredBy default, the MAC addressreplication feature is disabled.z On a port, the MAC address replication feature can be configured only once for a destination VLAN.If the configuration needs to be modified, you need to remove the existing configuration first.z With the MAC address replication feature disabled, all the MAC address entries that the destinationVLAN learns from the other VLANs through this function are removed.z MAC address entries obtained through the MAC address replication feature cannot be removedmanually. To remove a MAC address entry of this kind, you need to disable the MAC addressreplication feature first.Displaying MAC Address Table InformationTo do… Use the command… RemarksDisplay information about the MACaddress table display mac-address [ display-option ]Display the aging time of thedynamic MAC address entries inthe MAC address tabledisplay mac-address aging-timeDisplay the configured start portMAC address display port-macAvailable in any view
