1-25Operation Command DescriptionConfigure queueschedulingqueue-scheduler { strict-priority |hq-wrr queue0-weight queue1-weightqueue2-weight | wrr queue0-weightqueue1-weight queue2-weightqueue3-weight }RequiredBy default, all the ports adopt theWRR queue schedulingalgorithm, with the weights forqueues 0 to 3 as 1, 2, 3, and 4.The SP queue scheduling algorithm is not available on H3C S3100-SI series Ethernet switches.Configuration example# Adopt the WRR queue scheduling algorithm, with the weight for queue 0, queue 1, queue 2, andqueue 3 as 12, 8, 4, and 1.Display the configuration information after configuration.Configuration procedure: system-view[Sysname] queue-scheduler wrr 12 8 4 1[Sysname] display queue-schedulerQueue scheduling mode: weighted round robinweight of queue 0: 12weight of queue 1: 8weight of queue 2: 4weight of queue 3: 1Configuring Traffic AccountingOnly H3C S3100-EI series switches support this configuration.Refer to section Flow-Based Traffic Accounting for information about traffic accounting.Configuration prerequisitesThe ACL rules for traffic classification are defined. Refer to the ACL module of this manual forinformation about defining ACL rules.Configuration procedureYou can generate traffic statistics or clear traffic statistics on all the packets matching specific ACL rules,or on packets that match specific ACL rules and are of a VLAN, of a port group, or pass a port.
