Operation Manual – VLANH3C S5100-SI/EI Series Ethernet Switches Chapter 2 VLAN Configuration2-82.3 Configuring a Protocol-Based VLAN2.3.1 Protocol-Based VLAN Configuration Task ListComplete these tasks to configure protocol-based VLAN:Task RemarksConfiguring a Protocol Template for a Protocol-Based VLAN RequiredAssociating a Port with a Protocol-Based VLAN RequiredDisplaying Protocol-Based VLAN Configuration Optional2.3.2 Configuring a Protocol Template for a Protocol-Based VLANI. Configuration prerequisitesCreate a VLAN before configuring the VLAN as a protocol-based VLAN.II. Configuration procedureFollow these steps to configure the protocol template for a VLAN:To do... Use the command... RemarksEnter system view system-view —Enter VLAN view vlan vlan-id —Configure the protocoltemplate for the VLANprotocol-vlan [ protocol-index ] { at| ip | ipx { ethernetii | llc | raw |snap } | mode { ethernetii etypeetype-id | llc dsap dsap-id ssapssap-id | snap etype etype-id } }RequiredBy default, noprotocol templateis configured forthe VLAN.When configuring a protocol template for a protocol-based VLAN, use the at, ip or ipxkeyword to configure a standard template to match AppleTalk, IP, and IPX packetsrespectively, and use the mode keyword to configure a user-defined template.
