Operation Manual – Stack-ClusterH3C S5100-SI/EI Series Ethernet Switches Chapter 2 Cluster2-15VIII. Configuring inside-outside interaction for a clusterTable 2-11 Configure inside-outside interaction for a clusterOperation Command DescriptionEnter system view system-view —Enter cluster view cluster RequiredConfigure a shared FTPserver for the cluster ftp-server ip-addressOptionalBy default, themanagement device actsas the shared FTP server.Configure a shared TFTPserver for the cluster tftp-server ip-addressOptionalBy default, no sharedTFTP server isconfigured.Configure a sharedlogging host for the cluster logging-host ip-addressOptionalBy default, no sharedlogging host is configured.Configure a shared SNMPhost for the cluster snmp-host ip-addressOptionalBy default, no sharedSNMP host is configured.2.2.2 Configuring Member DevicesI. Member device configuration tasksTable 2-12 Member device configuration tasksOperation Description Related sectionEnable NDP globally and on specificports Required Section 2.2.2 II.Enable NTDP globally and on aspecific port Required Section 2.2.2 III.Enable the cluster function Required Section 2.2.2 IV.Access shared FTP/TFTP server froma member device Optional Section 2.2.2 V.
