Operation Manual – SSHH3C S5100-SI/EI Series Ethernet Switches Chapter 1 SSH Configuration1-291.5 Displaying and Maintaining SSH ConfigurationTo do... Use the command... RemarksDisplay the public keyinformation of the currentswitch’s key pairsdisplay public-key local { dsa |rsa } publicDisplay information aboutlocally saved public keysof SSH peersdisplay public-key peer [ brief |name pubkey-name ]Display information aboutSSH status and aboutsessions of activeconnections with SSHclientsdisplay ssh server { session |status }Display information aboutall SSH usersdisplay ssh user-information[ username ]Display the current sourceIP address or the IPaddress of the sourceinterface specified for theSSH server.display ssh-server source-ipDisplay the mappingsbetween host public keysand SSH servers savedon a clientdisplay ssh server-infoDisplay the current sourceIP address or the IPaddress of the sourceinterface specified for theSSH Client.display ssh2 source-ipAvailable in anyview1.6 Comparison of SSH Commands with the Same FunctionsAfter the SSH protocol supports the DSA asymmetric key algorithm, some SSHconfiguration commands are changed. For the sake of SSH configuration compatibility,the original commands are still supported. Table 1-18 lists both the original commandsand current commands.Table 1-18 List of SSH configuration commands with the same functionsOperation Original commands Current commandsDisplay local RSApublic keysdisplay rsa local-key-pairpublicdisplay public-key localrsa publicDisplay informationabout the peer RSApublic keysdisplay rsapeer-public-key [ brief |name keyname ]display public-key peer[ brief | namepubkey-name ]
