Operation Manual – IPv6 ManagementH3C S5100-SI/EI Series Ethernet Switches Chapter 1 IPv6 Configuration1-20To do… Use the command… RemarksDisplay the statistics of IPv6UDP packets display udp ipv6 statisticsClear IPv6 dynamic domainname cache information reset dns ipv6 dynamic-hostClear IPv6 neighborinformationreset ipv6 neighbors [ all | dynamic| interface interface-typeinterface-number | static ]Clear the statistics of IPv6packets reset ipv6 statisticsClear the statistics of all IPv6TCP packets reset tcp ipv6 statisticsClear the statistics of all IPv6UDP packets reset udp ipv6 statisticsAvailablein userviewNote:The display dns domain and display dns server commands are the same as thoseof IPv4 DNS. For details about the commands, refer to DNS Operation in this manual.1.3 IPv6 Configuration Example1.3.1 IPv6 Unicast Address ConfigurationI. Network requirementsTwo switches are directly connected through two Ethernet ports. The Ethernet portsbelong to VLAN 2. Different types of IPv6 addresses are configured for the interfaceVLAN-interface 2 on each switch to verify the connectivity between the two switches.The IPv6 prefix in the EUI-64 format is 2001::/64, the global unicast address of Switch Ais 3001::1/64, and the global unicast address of Switch B is 3001::2/64.II. Network diagramFigure 1-5 Network diagram for IPv6 address configuration
