Operation Manual – SSHH3C S5100-SI/EI Series Ethernet Switches Chapter 1 SSH Configuration1-50# Establish a connection to the server 10.165.87.136.[SwitchA] ssh2 10.165.87.136Username: client001Trying 10.165.87.136 ...Press CTRL+K to abortConnected to 10.165.87.136 ...The Server is not authenticated. Do you continue to access it?(Y/N):yDo you want to save the server's public key?(Y/N):nEnter password:*************************************************************************** Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd. All rights reserved.** Without the owner's prior written consent, ** no decompiling or reverse-engineering shall be allowed. ***************************************************************************1.7.6 When Switch Acts as Client for Publickey AuthenticationI. Network requirementsAs shown in Figure 1-31, establish an SSH connection between Switch A (SSH Client)and Switch B (SSH Server) for secure data exchange. The user name is client001 andthe SSH server’s IP address is 10.165.87.136. Publickey authentication is required.II. Network diagramFigure 1-31 Switch acts as client for publickey authenticationIII. Configuration procedureNote:In public key authentication, you can use either RSA or DSA public key. Here takes theDSA public key as an example.
