Operation Manual – FTP-SFTP-TFTPH3C S5100-SI/EI Series Ethernet Switches Chapter 1 FTP and SFTP Configuration1-16# Execute the get command to download the file named switch.bin to the Flashmemory of the switch.[ftp] get switch.bin# Execute the quit command to terminate the FTP connection and return to user view.[ftp] quit# After downloading the file, use the boot boot-loader command to specify thedownloaded file (switch.bin) to be the application for next startup, and then restart theswitch. Thus the switch application is upgraded. boot boot-loader switch.bin rebootNote:For information about the boot boot-loader command and how to specify the startupfile for a switch, refer to the System Maintenance and Debugging module of thismanual.1.3 SFTP ConfigurationComplete the following tasks to configure SFTP:Task RemarksEnabling an SFTP server RequiredConfiguring connection idle time OptionalSFTP Configuration: ASwitch Operating as anSFTP Server Supported SFTP client software —Basic configurations on an SFTPclient —SFTP Configuration: ASwitch Operating as anSFTP Client Specifying the source interface orsource IP address for an SFTPclientOptional
