The format for the codes is:fff-ttt-iii-date-cc-text messagewhere:fff is the three-digit function code that indicates the function being testedwhen the error occurred. For example, function code 089 is for themicroprocessor.ttt is the three-digit failure code that indicates the exact test failure thatwas encountered. (These codes are for trained service personnel andare described in the Hardware Maintenance Manual.)iii is the three-digit device ID. (These codes are for trained servicepersonnel and are described in the Hardware Maintenance Manual.)date is the date that the diagnostic test was run and the error recorded.cc is the check digit that is used to verify the validity of the information.text message is a message that the diagnostic program generates that indicatesthe reason for the problem. More information about the text messagefollows.Text messagesThe text message format is:Function Name: Result (Test-specific string)where:Function Name is the name of the function being tested when the error occurred.This corresponds to the function code (fff) given in the previous list.Result can be one of the following:Passed This result occurs when the diagnostic test completeswithout any errors.Failed This result occurs when the diagnostic test discovers anerror.User Aborted This result occurs when the user ends the diagnostictest before it is complete.Not Applicable This result occurs when the user specifies adiagnostic test for a device that is not present.Aborted This result occurs when the test could not proceedbecause of the system configuration.Warning This result occurs when a possible problem is reportedduring the diagnostic test, such as when a device that is tobe tested is not installed.Test-specific string is additional information that the user can use to analyze thediagnostic problem.126 IBM xSeries User's Reference
