iSeries Model 830168 iSeries HandbookThese functions do not have equivalent function PCI cards for the Model 830:• ASCII Adapter• V.25 Autocall cable• Select standby mode• X.21 switched WAN dial-up or Shorthold Mode WAN• Asynchronous communication speeds of less than 300 bps• Data Rate Select signal on the EIA 232/V.24 interface. This function is used by someolder 2400 bps modems to reduce the speed to 1200 bps.• LPDA-1 (Link Problem Determination Aids). This is a diagnostic function supported bysome (primarily older IBM) modems.• V.54 local and remote loopback (diagnostics functions supported by some modems)PCI adapters also do not support X.21 switched WAN dial-up or Shorthold Mode WAN.The fundamental bus architecture of the iSeries server is unchanged when using PCIadapters. The AS/400e IOP continues to off load the main processor; isolate the host fromadapter and network errors; and manage, configure, and service the adapters. PCIarchitecture offers advantages in flexibility over non-iSeries or non-AS/400e serverstructures.Processor Features• #2351 1/8-way Processor on Demand (iStar 540 Mhz) (RPQ 847125)– Processor Capacity Card (CCIN 24xx)– Processor 1 (CCIN 245D)– Processor 0 (CCIN 245D)• #2400 2-way Processor (iStar 400 Mhz)– Processor 1 (CCIN 2400)– Processor 0 (CCIN 245C)• #2402 4-way Processor (iStar 540 Mhz)– Processor 1 (CCIN 2402)– Processor 0 (CCIN 245D)• #2403 8-way Processor (iStar 540 Mhz)– Processor Capacity Card (CCIN 2403)– Processor 0 (CCIN 245D)– Processor 1 (CCIN 245D)
