Upgrades to iSeries 8xx Servers 207Upgrades to iSeries 8xx Servers– Existing Line cord is used on #5034/#5035– Replace the existing planar with a new planar– Modify the operator panel– Add new microcode to the operator panel– Add internal HSL, J-TAG, and ISO cables/assemblies• Memory– Main Storage DIMMs migrate (32 MB DIMMs do not migrate) from an old CEC to an820 CEC.– Base CCIN 3001 (64 MB) does not migrate and is property of the customer.– Base CCIN 3002 (256 MB) migrates to 820 CEC. Marketing configurator will add aquantity of two #3000 specify codes to the model upgrade order for administrativepurposes. Each #3000 represents one #3002 DIMM.– The #3001 features do not migrate and belong to the customer.– The #3002 and #3004 features migrate to the new 820 CEC.• New power supply shipped with the 820 system.• New line cord shipped with the 820 system.• Ship HSL and SPCN cables (must be ordered since they are not included in migrationtower conversion).• Existing DASD remains with and in the #5034/#5035.• Existing workstation adapters remain with and in the #5034/#5035.• Existing LAN adapters remain with and in the #5034/#5035.• Existing expansion towers remain attached (if desired) to the #5034/#5035.• The modem is not changed.• If any mirroring specify codes exist, they are migrated and apply to the entire 820system (“old” side and new).• If the #0044 exists, it is migrated but is treated as #0044 on the “old side” and istreated as #0041 on the new side.RISC to RISC Data Migration (#0205)This specify code is used when a customer orders a new (RISC) AS/400e server to replacean existing (RISC) AS/400e. The #0205 is orderable on any initial order iSeries 270 or 8xxmodel. Preloading Licensed Programs, by manufacturing, is not allowed with the #0205.Manufacturing only loads SLIC up through QSYS of OS/400 when #0205 is ordered.The #0205 and #5000 are mutually exclusive.