Towers and Racks256 iSeries Handbook#5034 Migration Tower I (10 Disk S20/620, 720System)The #5034 is a converted Model 620, S20, or 720 (with only 10possible internal CEC disk unit positions) system unit tower andany existing #5064 or #9364 expansion unit, used for migration ofexisting PCI/SPD cards, existing disk units, and existingremovable media devices, along with any attached PCI/SPDtowers. Additional “pre-V4R5” features may be ordered to usevacant card or device slots in the converted CEC and expansionunit and in any attached PCI/SPD tower. “V4R5 only” featurecards and internal devices are not allowed in the converted CECtower, the expansion unit, or any of the attached PCI/SPD towers.This feature is for migration upgrade purposes only and cannot be ordered separately.The #5034 can only attach to Models 820 and 830.There is a maximum of one #5034 on a Model 820 and 830.Attaching additional PCI/SPD towers to the #5034 after migrating to the Model 820 is notallowed.Select any two of these HSL cable features for this tower:• #1460 - 3m Copper HSL cable• #1461 - 6m Copper HSL cable• #1462 - 15m Copper HSL cableSelect one of these SPCN cables:• #1463 - 2m SPCN cable• #1464 - 6m SPCN cable• #1465 - 15m SPCN cable• #1466 - 30m SPCN cableThe existing system unit/CEC line cord should be used. Available line cord options areidentified in theiSeries and AS400e System Builder, SG24-2155.The #5034 is mutually exclusive with #5033, #5035, and #5077.Note: The #1462 15m HSL cable can only be used on HSL port A1 of the Model 820 todirectly connect a #5034 Migration Tower I.#5034/#5035 Migration Tower I
