Icom IC-2720H Instruction Manual

Also see for IC-2720: User reference guide Service manual

Contents

Icom IC-2720H Instruction Manual Manual pdf 50 page image

5 MEMORY OPERATION33D Memory/call➪call/memoryq Select the memory/call channel to be transferred.➥ Push the desired band’s [M/CALL•MW] several times toselect memory mode or call channel, then rotate thesame band’s [DIAL] to select the desired memory or callchannel.w Push the same band’s [M/CALL•MW] for 1 sec.• “!” indicator and “– –” indication blink, and shows VFO condi-tions.e Rotate the [DIAL] to select the target memory channel.• “C1” or “C2” blinks when the call channel is selected.• Scan edge channels, 1A/1b, 2A/2b, 3A/3b, 4A/4B, 5A/5b canalso be selected.r Push the [M/CALL•MW] for 1 sec. to transfer the selectedmemory/call channel contents to the target memory.• The targeted memory and transferred contents are indicated.z Select the memory/call channel to be trans-ferred.➥ Push [MR/CALL] to select memory mode,then select the desired memory channelvia [Y]/[Z] or keypad.➥ Push [MR/CALL] for 1 sec. then push[Y]/[Z] to select the desired call channel.x Push [FUNC], then [ CLR A(MW)] momentarily.• “!” indicator and “– –” indication blink, andshows VFO conditions.c Push [Y]/[Z] to select the target memorychannel.• “C1” or “C2” blinks when the call channel is selected.• Scan edge channels can also be selected.• The keypad cannot be used for the selection.v Push [FUNC] then push [ CLR A(MW)] for1 sec. to transfer the selected memory/callchannel contents to the target memory.• The targeted memory and transferred contentsare indicated.MR/CALLMW[Y]/[Z][EXAMPLE]: Transferring memory channel 30 contents to channel 31.MAINT XDUP TMMAINT XMMAINT XDUP TMMAINT XDUP TMSelect the target channel. Push for 1 sec.Push then push for 1 sec.Select the memory channel, then push for 1sec.Select the memory channel, push then push .Front panel operation:HM-133 operation:MWM/CALL MWM/CALL