Icom IC-2720H Instruction Manual

Also see for IC-2720: User reference guide Service manual

Contents

Icom IC-2720H Instruction Manual Manual pdf 67 page image

509DTMF MEMORY ENCODER9 Transmitting a DTMF codeD Automatic transmission (DTMF memory)qPush [TONE•DTMF] for 1 sec. to turn the DTMF memoryencoder ON.• “d” appears in place of the main band’s 100 MHz digit.wPush [SET• ] to enter DTMF memory programming con-dition.eRotate main band’s [DIAL] to select the desired DTMFmemory channel.r Push [PTT] to transmit the selected DTMF memory content.tPush [TONE•DTMF] for 1 sec. to cancel the DTMF en-coder.• When the DTMF encoder is turned ON continuously, each pushof the PTT transmits the previously selected DTMF code.z Push [FUNC] then [ LOW 6(DTMF)] to turn theDTMF memory encoder ON.• “d” appears in place of the main band’s 100 MHz digit.x Push [SET B(D-OFF)] to enter the DTMF memoryprogramming condition.c Push [Y] or [Z] to select the desired channel.v Push [PTT] to transmit the selected memory.• Exit the programming condition automatically.• Each push of [PTT] transmits the DTMF code.b Push [FUNC] then [ SET B(D-OFF)] to cancel theDTMF memory encoder.• When the DTMF encoder is turned ON continuously,each push of the PTT transmits the previously se-lected DTMF code.D Transmitting a DTMF memory directlyz Push [FUNC] then [ LOW 6(DTMF)] to turn theDTMF memory encoder ON.• “d” appears in place of the main band’s 100 MHz digit.x Push [DTMF-S] to turn the DTMF memory di-rect selection ON.• The function indicator (microphone) lights green.c Push the desired DTMF channel.• “0” to “9” and “A” to “D” are available for DTMFmemory channels.• The selected DTMF code is automatically transmit-ted without pushing PTT.NOTE: When no DTMF code programmedchannel number is pushed, it transmits the rela-tive DTMF code as the manual transmission de-scribed in the next page.v Push [DTMF-S] again to deactivate the DTMFmemory direct selection.b Push [FUNC] then [ SET B(D-OFF)] to cancelthe DTMF memory encoder.DTMF-SDTMF