Icom IC-2720H Instruction Manual

Also see for IC-2720: User reference guide Service manual

Contents

Icom IC-2720H Instruction Manual Manual pdf 86 page image

6911 OTHER FUNCTIONSD Cloning using a personal computerData can be cloned to and from a personal computer (Mi-crosoft® Windows® 98/2000/Me/XP) using the optional CS-2720 CLONING SOFTWARE and the optional cloning cableOPC-478U (USB type) or OPC-478 (RS-232C type). Consultthe CS-2720 CLONING SOFTWARE HELP file for details.D Cloning error NOTE: DO NOT push any key on the sub-transceiver dur-ing cloning. This will cause a cloning error.When the display as below appears, a cloning error has oc-curred.In such a case, both transceivers automatically return to theclone standby condition and cloning must be repeated. Packet operationD Data speedFor packet operation, the transceiver can be set to one of twodata speeds: 1200 bps (default) or 9600 bps.q While pushing [SET• ] turn power ON to enter initial setmode.w Push [SET• ] or [LOW•PRIO] to select the ‘bPS’ item.e Rotate the left band [DIAL] to select the desired dataspeed.r Push [PWR] to exit initial set mode.For 1200 bps operation—• Disconnect the microphone plug from the microphoneconnector during data transmission, otherwise the datasignal and voice signal are simultaneously transmitted.For 9600 bps operation—• When the transceiver is set for 9600 bps data transmis-sion in set mode, the microphone signal is automaticallycut. Therefore, it is not necessary to disconnect the mi-crophone plug from the connector in this case.• When pushing [PTT] during data transmission, data trans-mission is interrupted and voice signals have priority.MAINT XMMAINT XMMAINT XMAINT XM MMicrosoft and Windows are registered trademarks of Microsoft Corporation inthe U.S.A. and other countries.