365MEMORY OPERATION5 Memory bank settingq Push the desired band’s [M/CALL•MW] several times toselect memory mode, then select the desired memorychannel via the same band’s [DIAL].w Push the same band’s [MAIN•BAND] for 1 sec.• “– –” indication blinks as follows.e Push the [MAIN•BAND] again to set the channel to banksetting stand-by condition.• “– –” indication blinking stops.r Push the [M/CALL•MW] for 1 sec. then rotate the [DIAL] toselect the desired bank to be set.• Bank initial blinks as follows.t Push the [M/CALL•MW] again to set the channel into thebank.• “!” and bank initial blinking stops.y Push the [MAIN•BAND] for 1 sec. then push the[MAIN•BAND] momentarily again to return to regular mem-ory condition.u Repeat steps q to y to set another memory channel intothe same or another bank.z Push [MR/CALL] then select the desired mem-ory channel via [Y]/[Z] or keypad.• Push [BAND] to select the desired band (left orright) as the main band, in advance.x Push [FUNC] then [MONI 1(BANK)].• “– –” indication blinks.c Push [ CLR A(MW)] to set the channel to banksetting stand-by condition.• “– –” indication stops blinking.v Push [FUNC] then [ CLR A(MW)] then push[Y]/[Z] to select the desired bank to be set.• Bank initial blinks.b Push [ CLR A(MW)] to set the channel into thebank.• “!” and bank initial stops blinking.n Push [FUNC], [MONI 1(BANK)] then [CLR A(MW)]to return to regular memory channel condition.m Repeat steps z to n to set an another memorychannel into the same or another bank.BANK[Y]/[Z]MWMAINT XMMAINT XM

quick reference guide

using the mounting bracket

battery connection

antenna installation

i repeater operation

I Front panel— controller

panel description

I Function display

main unit

I Microphone (HM-133)

I Microphone keypad

I Optional microphones (HM-118N/TN/TAN)

I Preparation

setting a frequency

I Using the tuning dial

I Tuning step selection

I Lock functions

I Receiving

I Squelch attenuator

I V/V, U/U simultaneous receive (Para-watch)

I Sub band mute/sub band busy beep

I Transmitting

I One-touch PTT function

I General

I Accessing a repeater

repeater operation

I Subaudible tones

I Offset frequency

I General description

I Programming a memory channel

programming a memory channel via the microphone

I Transferring memory contents

memory operation

I Memory clearing

I Memory bank selection

I Memory bank setting

I Transferring bank contents

I Call channel selection

I Programming a call channel

I Scan types

I Scan start/stop

I Scan edges programming

scan operation

I Skip channel setting

I Scan resume condition

I Priority watch types

I Priority watch operation

I Programming a DTMF code

dtmf memory encoder

i transmitting a dtmf code

I DTMF speed

I Pocket beep operation

tone scan

other functions

I Initial set mode

I AM/FM narrow mode

i weather channel operation

I Microphone keys

I Packet operation

I Troubleshooting

I Fuse replacement

I Speciﬁcations

I Options

mode arrangement

Icom IC-2720H Instruction Manual

IC-2720

IC-2720H