5MEMORY OPERATION345 Memory clearingContents of programmed memories can be cleared (blanked),if desired.q Push [V/MHz•SCAN] to select VFO mode in the desiredband (left or right).w Push the same band’s [M/CALL•MW] for 1 sec.• “!” indicator and the memory channel number blink.e Rotate the same band’s [DIAL] to select the memory chan-nel to be cleared.• Memory channels not yet programmed are blank.r Push the same band’s [M/CALL•MW] momentarily, thenpush the [M/CALL•MW] again for 1 sec. This operation must be performed within 1.5 sec.• 3 beeps sound, then the frequency is cleared.• “!” indicator and the channel number blink continuously.• When clearing the call channel, the current VFO conditions arere-programmed into the call channel automatically.t Push the same band’s [MAIN•BAND] or [V/MHz•SCAN], toreturn to VFO mode.NOTE: Be careful!— the contents of cleared memoriesCANNOT be recalled.[EXAMPLE]: Clearing memory channel 20.MAINT XMMAINT XMMAINT XMMAINT XMMAINT XMPush to select VFO. Rotate for selecting memory channel.Push for 1 sec.Push any switch, except .Push momentarily, then push again for 1 sec.BeepBeepBeep“““““MWM/CALLMWM/CALL MWM/CALL MWM/CALLSCANV/MHz
