386CALL CHANNEL OPERATION56 Call channel selectionCall channel is pre-programmed memory channel that can beaccessed by simply pushing call channel button.➥ Push [M/CALL•MW] sev-eral times to select thecall channel mode thenrotate the same band’s[DIAL] to select the de-sired call channel.• “C1” or “C2” appears in-stead of memory channelnumber indication.• Push the [M/CALL•MW] sev-eral times to select memorymode, or push the sameband’s [V/MHz•SCAN] to se-lect VFO mode.➥ Push [MR/CALL] for 1 sec. to select the callchannel mode then push [Y]/[Z] to select thedesired call channel in the main band.• Push [MR/CALL ] to select memory mode, or push[VFO/LOCK] to select VFO mode. Call channel transferringq Push the desired band’s [M/CALL•MW] several times thenrotate the same band’s [DIAL] to select the desired callchannel.• “C1” or “C2” appears.w Push the [M/CALL•MW] for 1 sec., then rotate the [DIAL] toselect the memory channel to transfer the contents to.• “!” indicator and memory channel number blink.• To transfer to the VFO, select “– –” with the [DIAL] then push the[M/CALL•MW] for 1 sec.e Push the [M/CALL•MW] for 1 sec. to transfer the contents.z Push [MR/CALL] for 1 sec. then push [Y]/[Z]to select the desired call channel in the mainband.x Push [FUNC], [CLR A(MW)] momentarily, thenpush [Y]/[Z] to select the memory channel totransfer the contents to.• To transfer to the VFO, push [Y]/[Z] to select“– –” then push [FUNC], [CLR A(MW)] for 1 sec.c Push [FUNC], then [CLR A(MW)] for 1 sec. totransfer the contents.MR/CALLMW[Y]/[Z]MR/CALLMAINT XMPush [M/CALL•MW] several timesto select call channel.“C1” or “C2” appears✔INFORMATIONMAINT XMWhen the VFO mode isselected from the call channel,a small “c” appears instead ofmemory channel number.

quick reference guide

using the mounting bracket

battery connection

antenna installation

i repeater operation

I Front panel— controller

panel description

I Function display

main unit

I Microphone (HM-133)

I Microphone keypad

I Optional microphones (HM-118N/TN/TAN)

I Preparation

setting a frequency

I Using the tuning dial

I Tuning step selection

I Lock functions

I Receiving

I Squelch attenuator

I V/V, U/U simultaneous receive (Para-watch)

I Sub band mute/sub band busy beep

I Transmitting

I One-touch PTT function

I General

I Accessing a repeater

repeater operation

I Subaudible tones

I Offset frequency

I General description

I Programming a memory channel

programming a memory channel via the microphone

I Transferring memory contents

memory operation

I Memory clearing

I Memory bank selection

I Memory bank setting

I Transferring bank contents

I Call channel selection

I Programming a call channel

I Scan types

I Scan start/stop

I Scan edges programming

scan operation

I Skip channel setting

I Scan resume condition

I Priority watch types

I Priority watch operation

I Programming a DTMF code

dtmf memory encoder

i transmitting a dtmf code

I DTMF speed

I Pocket beep operation

tone scan

other functions

I Initial set mode

I AM/FM narrow mode

i weather channel operation

I Microphone keys

I Packet operation

I Troubleshooting

I Fuse replacement

I Speciﬁcations

I Options

mode arrangement

Icom IC-2720H Instruction Manual

IC-2720

IC-2720H