6411OTHER FUNCTIONS11 AM/FM narrow mode [The IC-2720H has AM mode reception for both the left andright bands, and FM narrow mode is available for the leftband. Typically, AM mode is used for the air band(118–135.995 MHz).The FM narrow mode selection is available for the USA ver-sion’s left band only.qSelect the desired frequency band in VFO mode, or the de-sired memory channel on the left or right band as desired.• If you want to select FM narrow mode, select the desired fre-quency band or memory channel on the left band.w Push [SET• ] to enter set mode.e Push [SET• ] or [LOW•PRIO] to select “nAr” item or“COn” item.• Select “nAr” for Wide/Narrow setting.• Select “COn” for operating mode setting.r Rotate the same band’s [DIAL] to select FM narrow or AMas desired.• “AM” appears when AM mode is selected.t Push [TONE•DTMF] to exit set mode.z Push [BAND] to select the desired band (left orright) as the main band.• If you want to select FM narrow mode, select the de-sired frequency band or memory channel on the leftband.x Set the desired frequency or memory channel.c Push [SET B(D-OFF)] to enter set mode.v Push [SET B(D-OFF)] or [ENT C(T-OFF)] to select“nAr” item or “COn” item.• Select “nAr” for Wide/Narrow setting.• Select “COn” for operating mode setting.b Push [Y]/[Z] to select FM narrow or AM as de-sired.n Push [CLR A(MW)] to exit set mode.SETBMAINT XMMAINT XM• Wide/Narrow setting • Operating mode setting

quick reference guide

using the mounting bracket

battery connection

antenna installation

i repeater operation

I Front panel— controller

panel description

I Function display

main unit

I Microphone (HM-133)

I Microphone keypad

I Optional microphones (HM-118N/TN/TAN)

I Preparation

setting a frequency

I Using the tuning dial

I Tuning step selection

I Lock functions

I Receiving

I Squelch attenuator

I V/V, U/U simultaneous receive (Para-watch)

I Sub band mute/sub band busy beep

I Transmitting

I One-touch PTT function

I General

I Accessing a repeater

repeater operation

I Subaudible tones

I Offset frequency

I General description

I Programming a memory channel

programming a memory channel via the microphone

I Transferring memory contents

memory operation

I Memory clearing

I Memory bank selection

I Memory bank setting

I Transferring bank contents

I Call channel selection

I Programming a call channel

I Scan types

I Scan start/stop

I Scan edges programming

scan operation

I Skip channel setting

I Scan resume condition

I Priority watch types

I Priority watch operation

I Programming a DTMF code

dtmf memory encoder

i transmitting a dtmf code

I DTMF speed

I Pocket beep operation

tone scan

other functions

I Initial set mode

I AM/FM narrow mode

i weather channel operation

I Microphone keys

I Packet operation

I Troubleshooting

I Fuse replacement

I Speciﬁcations

I Options

mode arrangement

Icom IC-2720H Instruction Manual

IC-2720

IC-2720H