478 PRIORITY WATCH Priority watch operationq Select VFO mode; then, set an operating frequency in thedesired band (left or right).w Set the watching channel(s).For memory channel watch:Select the desired memory channel.For memory scan watch:Select memory mode; then, push the same band’s[V/MHz•SCAN] for 1 sec. to start memory scan.For call channel watch:Select the desired call channel by pushing the sameband’s [M/CALL•MW] once or twice, then rotate the [DIAL].e Push [LOW•PRIO] for 1 sec. to start the watch.• The transceiver checks the memory or call channel every 5 sec.• The watch resumes according to the selected scan resume con-dition. (p. 45)• While the watch is pausing, pushing the [M/CALL(PRIO)] re-sumes the watch manually.r Push [LOW•PRIO] for 1 sec. to stop the watch.z Select VFO mode; then, set the desired fre-quency.x Set the watching channel(s).For memory channel watch:Push [MR/CALL] then [Y] or [Z] to select the de-sired memory channel.For memory scan watch:Push [MR/CALL], then push [ SCAN 2] to start thememory scan.For call channel watch:Push [MR/CALL] for 1 sec. then push [Y] or [Z]to select the call channel.c Push [ PRIO 3(PTT-M)] to start the watch.• The transceiver checks the memory or call channelevery 5 sec.• The watch resumes according to the selected scan re-sume condition. (p. 45)• To resume the watch manually when paused, push[PRIO 3(PTT-M)] or [ CLR A(MW)].v To stop the watch, push [ CLR A(MW)] once (ortwice while watch is paused).PRIO3

quick reference guide

using the mounting bracket

battery connection

antenna installation

i repeater operation

I Front panel— controller

panel description

I Function display

main unit

I Microphone (HM-133)

I Microphone keypad

I Optional microphones (HM-118N/TN/TAN)

I Preparation

setting a frequency

I Using the tuning dial

I Tuning step selection

I Lock functions

I Receiving

I Squelch attenuator

I V/V, U/U simultaneous receive (Para-watch)

I Sub band mute/sub band busy beep

I Transmitting

I One-touch PTT function

I General

I Accessing a repeater

repeater operation

I Subaudible tones

I Offset frequency

I General description

I Programming a memory channel

programming a memory channel via the microphone

I Transferring memory contents

memory operation

I Memory clearing

I Memory bank selection

I Memory bank setting

I Transferring bank contents

I Call channel selection

I Programming a call channel

I Scan types

I Scan start/stop

I Scan edges programming

scan operation

I Skip channel setting

I Scan resume condition

I Priority watch types

I Priority watch operation

I Programming a DTMF code

dtmf memory encoder

i transmitting a dtmf code

I DTMF speed

I Pocket beep operation

tone scan

other functions

I Initial set mode

I AM/FM narrow mode

i weather channel operation

I Microphone keys

I Packet operation

I Troubleshooting

I Fuse replacement

I Speciﬁcations

I Options

mode arrangement

Icom IC-2720H Instruction Manual

IC-2720

IC-2720H