Icom IC-V8000 Instruction Manual

Also see for IC-V8000: Service manual Service manual Optional instructions Instruction manual

Contents

285MEMORY OPERATION5D Memory/call➪call/memoryq Select the memory/call channel to be transferred.➥ Push [M/CALL(PRIO)] to select memory mode, then ro-tate the tuning dial to select the desired memory channel.➥ Push [M/CALL(PRIO)] for 1 sec. to select the call channel.w Push [MW(S.MW)] momentarily.• “M” indicator and “– –” indication blink, and shows VFO condi-tions.e Rotate the tuning dial to select the target memory channel.• “C” blinks when the call channel is selected.• Scan edge channels, 1A/1b, 2A/2b, 3A/3b, can also be selected.r Push [MW(S.MW)] for 1 sec. to transfer the selected mem-ory/call channel contents to the target memory.• The targeted memory and transferred contents are indicated.z Select the memory/call channel to be trans-ferred.➥ Push [MR/CALL] to select memory mode,then select the desired memory channelvia [Y]/[Z] or keypad.➥ Push [MR/CALL] for 1 sec. to select thecall channel.x Push [FUNC], then [ CLR A(MW)] momentarily.• “M” indicator and “– –” indication blink, and showsVFO conditions.c Push [Y]/[Z] to select the target memorychannel.• “C” blinks when the call channel is selected.• Scan edge channels can also be selected.• The keypad cannot be used for the selection.v Push [FUNC] then push [ CLR A(MW)] for1 sec. to transfer the selected memory/callchannel contents to the target memory.• The targeted memory and transferred contentsare indicated.MR/CALLMW[Y]/[Z][EXAMPLE]: Transferring memory channel 30 contents to channel 31.Select the target channel. Push for 1 sec.Push then push for 1 sec.S.MWMWSelect the memory channel, then push .S.MWMWSelect the memory channel, push then push .Front panel operation:HM-133V operation: