Icom IC-V8000 Instruction Manual

Also see for IC-V8000: Service manual Service manual Optional instructions Instruction manual

Contents

5611PAGER/CODE SQUELCH11D Waiting for a call from a specific stationq Set the operating frequency.w Push [BANK(OPT)] for 1 sec.• 100 MHz digit shows “P.”e Wait for a call.• When receiving a call, the caller’s ID or group code appears asshown at right.r Push [PTT] to send an answer back call and display theoperating frequency.t After confirming a connection, push [BANK(OPT)] for1 sec. to select code squelch operation, or repeat the pre-vious key operation again to select non-selective callingsystem.z Set the operating frequency.x Push [BANK/OPTION] for 1 sec.• 100 MHz digit shows “P.”c Wait for a call.• When receiving a call, the caller’s ID or groupcode appears as shown at right.• DO NOT push any digit keys while code chan-nels C0 to C6 are displayed, or code channelcontents will be changed.v Push [PTT] to send an answer back calland display the operating frequency.b After confirming a connection, push[BANK/OPTION] for 1 sec. to select codesquelch operation, or repeat the previouskey operation again to select non-selectivecalling system.• PERSONAL CALLSThis display appears whenyou are called with your IDcode and the calling station’sID code is 123.• GROUP CALLSThis display appears whenyou are called with the groupcode, 888, and 888 has beenprogrammed into code chan-nel C6.• ERROR INFORMATIONWhen the transceiver receivesan incomplete signal, “E” andpreviously received code ap-pear.Previously received code.Code channelCP and blink.BANK/OPTION