345MEMORY OPERATION5 Transferring bank contentsContents of programmed memory banks can be cleared ortransferred to another bank.INFORMATION: Even if the memory bank contents arecleared, the memory channel contents still remain pro-grammed.q Select the desired bank contents to be transferred or erased.➥ Push [M/CALL(PRIO)] to select memory mode.➥ Push [BANK(OPT)] then rotate the tuning dial to selectthe desired memory bank.• Bank initial blinks.➥ Push [BANK(OPT)] to select the bank then rotate thetuning dial to select the desired contents.• Bank initial stops blinking.w Push [MW(S.MW)] momentarily.• “M” and bank initial blink.e Rotate the tuning dial to select the desired bank initial totransfer or erase.• Select “– –” indication when erasing the contents from the bank.r Push [MW(S.MW)] again.• “M” and bank initial or “– –” indication stops blinking.t Push [BANK(OPT)] twice to return to regular memory con-dition.y Repeat steps q to t for transferring or erasing an an-other banks contents.z Select the desired bank contents.➥ Push [MR/CALL] to select memorymode.➥ Push [BANK/OPTION] then select thedesired memory bank via [Y]/[Z].➥ Push [BANK/OPTION] to select thebank then select the desired contentsvia [Y]/[Z].x Push [FUNC] then [CLR A(MW)].• “M” and bank initial blinks.c Push [Y]/[Z] to select the desired bank ini-tial to transfer or erase.• Select “– –” indication when erasing the con-tents from the bank.v Push [CLR A(MW)].• “M” and bank initial or “– –” indication stopsblinking.b Push [BANK/OPTION] twice to return toregular memory condition.n Repeat steps z to b for transferring orerasing an another banks contents.BANK/OPTIONMW[Y]/[Z]

quick reference guide

battery connection

antenna installation

i repeater operation

I Front panel

I Function display

I Rear panel

I Microphone (HM-133V)

I Microphone keypad

I Preparation

I Using the keypad

I Tuning step selection

I Lock functions

I Receiving

I Audio mute function

I Transmitting

I One-touch PTT function

I Accessing a repeater

repeater operation

I Subaudible tones

I Offset frequency

i reversed duplex mode

I Auto repeater

I General description

I Programming a memory channel

programming a memory channel via the microphone

I Transferring memory contents

memory operation

I Memory clearing

i programming channel names

I Memory bank selection

I Memory bank setting

I Transferring bank contents

I Call channel selection

I Programming a call channel

I Scan types

I Scan start/stop

I Scan edges programming

I Skip channel setting

I Scan resume condition

I Priority watch types

I Priority watch operation

I Programming a DTMF code

i transmitting a dtmf code

I DTMF speed

I Pocket beep operation

tone scan

I Code programming

I Pager operation

other functions

I Initial set mode

i weather channel operation

i microphone keys

I Partial reset

I Data cloning

I Troubleshooting

i fuse replacement

I Optional unit installation

specifications and options

mode arrangement

Icom IC-V8000 Instruction Manual

RECEIVER CIRCUITS

MAIN UNIT

PLL CIRCUITS

HM-133V

LOGIC BOARD

IC-V8000

ANI FUNCTION

Preparation

Operation

voice scrambler

explicit definitions

panel description

i function display

i rear panel

i microphone keypad

using the mounting bracket

i battery connection

i antenna installation

setting a frequency

i using the keypad

i tuning step selection

i lock functions

basic operation

i audio mute function

i selecting output power

subaudible tones

d frequency range and offset direction

repeater lockout

i programming a memory channel

i programming a memory channel via the microphone

i transferring memory contents

i memory clearing

i memory bank selection

i memory bank setting

call channel operation

i programming a call channel

scan operation

i scan edges programming

i skip channel setting

i scan resume condition

priority watch

i priority watch operation

dtmf memory encoder

transmitting a dtmf code

i dtmf speed

pocket beep and tone squelch