37SCAN OPERATION7 Scan typesScanning searches for signals automatically and makes iteasier to locate new stations for contact or listening purposes.There are 3 scan types and 4 resume conditions to suit youroperating needs.FULL SCAN (p. 38) Repeatedly scans all frequen-cies over the entire band.Used as the simplest scanwithout any preliminary set-tings necessary.BandedgeBandedgeScanJumpPROGRAMMED SCAN(p. 38)Repeatedly scans betweentwo user-programmed fre-quencies. Used for checkingfor frequencies within a speci-fied range such as repeateroutput frequencies, etc. 3pairs of scan edges are avail-able.BandedgeBandedgeScan edgesScanJumpMEMORY SCAN (p. 38) Repeatedly scans memorychannels except those set asskip channels. Used for often-called channels and for by-passing normally busychannels such as repeaterfrequencies.SKIPSKIPM 0 M 4M 1 M 2 M 3M 5M 199 M 6SCAN RESUMECONDITION (p. 42)4 resume conditions are avail-able: 3 timer scans and pausescan. When receiving a sig-nal, pause scan pauses untilthe signal disappears; timerscans pause for 5, 10 or15 sec.PausescanReceivinga signalTimerscanPausing2 sec. NOTE: A tone scan function is available to search for subaudible tones (e.g. when you want to find a subaudible tone fre-quency necessary to open a repeater). See p. 51 for details.

quick reference guide

battery connection

antenna installation

i repeater operation

I Front panel

I Function display

I Rear panel

I Microphone (HM-133V)

I Microphone keypad

I Preparation

I Using the keypad

I Tuning step selection

I Lock functions

I Receiving

I Audio mute function

I Transmitting

I One-touch PTT function

I Accessing a repeater

repeater operation

I Subaudible tones

I Offset frequency

i reversed duplex mode

I Auto repeater

I General description

I Programming a memory channel

programming a memory channel via the microphone

I Transferring memory contents

memory operation

I Memory clearing

i programming channel names

I Memory bank selection

I Memory bank setting

I Transferring bank contents

I Call channel selection

I Programming a call channel

I Scan types

I Scan start/stop

I Scan edges programming

I Skip channel setting

I Scan resume condition

I Priority watch types

I Priority watch operation

I Programming a DTMF code

i transmitting a dtmf code

I DTMF speed

I Pocket beep operation

tone scan

I Code programming

I Pager operation

other functions

I Initial set mode

i weather channel operation

i microphone keys

I Partial reset

I Data cloning

I Troubleshooting

i fuse replacement

I Optional unit installation

specifications and options

mode arrangement

Icom IC-V8000 Instruction Manual

RECEIVER CIRCUITS

MAIN UNIT

PLL CIRCUITS

HM-133V

LOGIC BOARD

IC-V8000

ANI FUNCTION

Preparation

Operation

voice scrambler

explicit definitions

panel description

i function display

i rear panel

i microphone keypad

using the mounting bracket

i battery connection

i antenna installation

setting a frequency

i using the keypad

i tuning step selection

i lock functions

basic operation

i audio mute function

i selecting output power

subaudible tones

d frequency range and offset direction

repeater lockout

i programming a memory channel

i programming a memory channel via the microphone

i transferring memory contents

i memory clearing

i memory bank selection

i memory bank setting

call channel operation

i programming a call channel

scan operation

i scan edges programming

i skip channel setting

i scan resume condition

priority watch

i priority watch operation

dtmf memory encoder

transmitting a dtmf code

i dtmf speed

pocket beep and tone squelch