Icom IC-V8000 Instruction Manual

Also see for IC-V8000: Service manual Service manual Optional instructions Instruction manual

Contents

469DTMF MEMORY ENCODER9 Transmitting a DTMF codeD Automatic transmission (DTMF memory)z Push [FUNC] then [ LOW 6(DTMF)] to turn theDTMF memory encoder ON.• “d” appears in place of the 100 MHz digit.x Push [ SET B(D-OFF)] to enter the DTMF mem-ory programming condition.c Push [Y] or [Z] to select the desired channel.v Push [PTT] to transmit the selected memory.• Exit the programming condition automatically.• Each push of [PTT] transmits the DTMF code.b Push [FUNC] then [SET B(D-OFF)] to cancel theDTMF memory encoder.• When the DTMF encoder is turned ON continuously,each push of the PTT transmits the previously se-lected DTMF code.D Transmitting a DTMF memory directlyz Push [FUNC] then [ LOW 6(DTMF)] to turn theDTMF memory encoder ON.• “d” appears in place of the 100 MHz digit.x Push [DTMF-S] to turn the DTMF memory di-rect selection ON.• The function indicator (microphone) lights green.c Push the desired DTMF channel number.• “0” to “9” are available for channel numbers.• The selected DTMF code is automatically transmit-ted without pushing PTT.D Transmitting a DTMF memory directly— continuedNOTE: When no DTMF code programmedchannel number is pushed, it transmits previ-ously transmitted DTMF memory code.v Push [DTMF-S] again to deactivate the DTMFmemory direct selection.b Push [FUNC] then [ SET B(D-OFF)] to cancelthe DTMF memory encoder.D Manual transmissionz Deactivate the DTMF memory encoder bypushing [FUNC] then [SET B(D-OFF)].x Push [DTMF-S] to turn the DTMF direct selec-tion ON.• The function indicator (microphone) lights green.c Push one of “A” to “F” keys momentarily, thenpush the desired DTMF keys, 0–9 and A to F.• A: [CLR A(MW)] B: [ SET B(D-OFF)],C: [ENT C(T-OFF)] D: [ SQLY D(MUTE)],E: [MM(TONE-1)] F: [ SQLZ #(16KEY-L)]• Automatically transmits without pushing PTT.• The first code, one of “A” to “F,” is not transmitted.DTMF code transmission starts from the 2nd code.v Push [DTMF-S] again to deactivate the DTMFdirect selection.DTMF-SDTMF-SDTMF-SDTMF