English | 11Notes on Sound Management SystemThe KDC-PSW9527/W9027 allows you to set up thebest sound field to your car using the audio setup.This is the Sound Management System.There are two types of audio setup mode:Easy audio setup (called Easy mode) andProfessional audio setup (called PRO mode).Audio setup (Easy mode)When you select the cabin size and the speakertype you are using in the easy audio setup (Easymode), you can set the best sound field to yourcar automatically.• Refer to 'Audio Setup (Easy mode)' (page 28).Audio setup (PRO mode)While in the professional audio setup (PROmode), you can fine-tune and memory theX’Over (Cross-over), DTA (Digital Time Alignment),and EQ (Equalizer), controls in addition to thesound quality you have set in the audio setup(Easy mode).• Refer to 'Audio Setup (PRO mode)' (page 30).First, set up the sound field in your car by 'Audiosetup (Easy mode)' (page 28). Proceed to thefollowing steps for sound field setup.1. Enter Audio Setup mode.Press the [NEXT] button.Repeatedly press the button until "AD SET" isdisplayed above the [3] button.Refer to 'Notes on Multi-function Key System'(page 10).2. Set the cabin size of your car.Press the [2] ("CABIN") button.3. Select the cabin size of your car.Press the [4] or [¢] button.4. Select a speakerPress the [3] ("SP-SEL") button.5. Set up the speakerPress the [2] — [5] button.• For the speakers you can set up using buttons [2] to[5], see the 'Audio setup (Easy mode)' (page 28).6. Select the speaker size.Press the [4] or [¢] button.7. Exit Audio setup modePress the [6] ("RTN") button.Now, you can create the best sound field to yourcar.For the detailed speaker setup, see the 'Audio Setup(PRO mode)' (page 30).