Kenwood KDC-PSW9527 Instruction Manual

Also see for KDC-PSW9527: Service manual

Contents

English | 25Subwoofer OutputTurning the Subwoofer output ON or OFF.Press the [SW] button for at least 1 second.Each time the button is pressed Subwooferoutput switches ON or OFF.When it’s ON, "SUB WOOFER ON" is displayed.• When the 'Dual Zone System' is ON, each of thefollowing setup is ignored.- "WOW"/ "PLII"/ "POSI"/ "PHASE"('Audio control' (KDC-PSW9527/W9027) (page 26))- "X'over"/ "EQ"/ "DTA"('Audio Setup (PRO mode)' (page 30))- System Q('System Q' (KDC-PSW9527/W9027) (page 21))- WOW/ X'OVER('Audio Control' (KDC-W8027) (page 22))• The Dual Zone System can be used only when youhave set the rear speaker to any mode other than"None" in the 'Audio Setup (Easy mode)' (page 28).