Kenwood KDC-PSW9527 Instruction Manual

Also see for KDC-PSW9527: Service manual

Contents

English | 17Display:B/ Display:C/ Display:DGraphic part/ Spectrum AnalyzerDisplay SwitchingSwitching the graphic Display/ Spectrum analyzerdisplay.1 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "DISP" isdisplayed above the [3]/ [4] button.Refer to 'Notes on Multi-function Key System'(page 10).2 Enter display control modePress the [3]/ [4] ("DISP") button.3 Select the display modePress the [2] ("MODE") button.Select the "Display:B"/ "Display:C"/ "Display:D"display.4 Select the graphic/ spectrum analyzerdisplayPress the [4] ("SA-grph") button.5 Select the graphic/ spectrum analyzerdisplay part displayPress the [4] or [¢] button.Each time the button is pressed the graphicdisplay/ spectrum analyzer display switches asshown below.Graphic display/ Spectrum Analyzer displayMovie 1Movie 2*Downloaded movieSpectrum analyzer 1…Spectrum analyzer 5Wallpaper• * Function of the KDC-PSW95276 Exit display control modePress the [6] ("RTN") button.• The setting of this function is available while "Display :B"/ "Display:C"/ "Display:D" is selected for the Displaymode.Display:B/ Display:C/ Display:DWallpaper selectingSelect a wallpaper to display when Display Type isset to "Display:B"/ "Display:C"/ "Display:D".1 Select the wallpaper displayRefer to 'Graphic part/ Spectrum Analyzer DisplaySwitching' (page 17).2 Select the wallpaperDisplay the wallpapers one after anotherand select one1 Turn the wallpaper scan ON.Press the [38] button.Each time the button is pressed the Wallpaperscan is turned ON and OFF.When it’s ON, "SCAN" is displayed.When it’s ON, each wallpaper is displayed everyseveral seconds.2 At the wallpaper you want to display.Press the [38] button.Select wallpaper manually1 Turn the wallpaper scan OFF.Press the [38] button.Each time the button is pressed the Wallpaperscan is turned ON and OFF.2 Select the wallpaper.Press the [FM] or [AM] button.Each time the button is pressed the wallpaperchanges.3 Exit Display Control modePress the [6] ("RTN") button.