Kenwood KDC-PSW9527 Instruction Manual

Also see for KDC-PSW9527: Service manual

Contents

English | 51In Tuner modeNews Bulletin with Timeout SettingIt switches automatically when a news bulletinstarts even if the radio isn’t being listened to. Also,the time interval when interrupt is prohibited canbe set.Display and Setting"News: OFF""News: 00min"…"News: 90min"When "News: 00min" — "News: 90min" is set, theNews Bulletin Interrupt function is ON.When it’s ON, the "News " indicator is ON.When the news bulletin starts, "News " isdisplayed, and it switches to the news bulletin.• If you choose the "20min" setting, further newsbulletins will not be received for 20 minutes once thefirst news bulletin is received.• The news bulletin volume is the same level that wasset for 'Traffic Information' (page 35).• This function is only available if the desired stationsends PTY-code for news bulletin or belongs to'Enhanced Other Network'-Network sending PTY-codefor news bulletin.• When the News Bulletin Interrupt function is ON, itswitches to an FM station.In Tuner modeLocal SeekOnly stations whose reception is good aresearched for in auto seek tuning.Display Setting"Local Seek: OFF" The local seek function is OFF."Local Seek: ON" The local seek function is ON.In Tuner modeTuning ModeSets the tuning mode.Tuning mode Display OperationAuto seek "Seek mode: Auto 1" Automatic search for astation.Preset stationseek"Seek mode: Auto 2" Search in order of the stationsin the Preset memory.Manual "Seek mode: Manual" Normal manual tuningcontrol.In Tuner modeAuto Memory EntryFor the operation method refer to 'Auto MemoryEntry' (page 34).AF (Alternative Frequency)When poor reception is experienced,automatically switch to another frequencybroadcasting the same program in the same RDSnetwork with better reception.Display Setting"AF: ON" The AF function is ON."AF: OFF" The AF function is OFF.• When no other stations with stronger reception areavailable for the same program in the RDS network,you may hear the incoming broadcast in bits andsnatches. Turn OFF the AF function in such a case.Restricting RDS Region (RegionRestrict Function)You can choose whether or not to restrict theRDS channels, received with the AF function for aparticular network, to a specific region.Display Setting"Regional: ON" The Region Restrict Function is ON."Regional: OFF" The Region Restrict Function is OFF.• Sometimes stations in the same network broadcastdifferent programs or use different program servicenames.