Kenwood KDC-PSW9527 Instruction Manual

Also see for KDC-PSW9527: Service manual

Contents

34 | EnglishTuner featuresStation Preset MemoryPutting the station in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the frequency to put in the memoryPress the [4] or [¢] button.3 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "[1]" — "[6]" aredisplayed above the [1] — [6] buttons.Refer to 'Notes on Multi-function Key System'(page 10).4 Put the frequency in the memoryPress the desired [1] — [6] button for at least2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in thememory on each [1] — [6] button.Auto Memory EntryPutting a station with good reception in thememory automatically.1 Select the band for Auto Memory EntryPress the [FM] or [AM] button.2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select the Auto Memory Entry modePress the [FM] or [AM] button.Select the "Auto Memory" display.4 Open Auto Memory EntryPress the [4] or [¢] button for at least 2seconds.When 6 stations that can be received are put inthe memory Auto Memory Entry closes.• When the 'AF (Alternative Frequency)' (page 51) is ON,only RDS stations are put in the memory.• When Auto Memory Entry is done in the FM2 band,the RDS stations preset in the FM1 band aren’t put inthe memory.Likewise, when it is done in the FM3 band, RDSstations preset in FM1 or FM2 aren’t put in thememory.Preset TuningCalling up the stations in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "[1]" — "[6]" aredisplayed above the [1] — [6] buttons.Refer to 'Notes on Multi-function Key System'(page 10).3 Call up the stationPress the desired [1] — [6] button.Function of RemoteSNPP (Station Name Preset Play)Displaying the program service name andselecting the station.1 Enter SNPP modePress the [DNPP] button on the remote.When "SNPP" is displayed, the program servicename displays in the FM1, FM2, FM3 and AMband in order.• For stations without a program service name thefrequency is displayed instead.Changing the display orderPress the [4] or [¢] button.Changing the displayed bandPress the [FM] or [AM] button.2 If the station you want is displayedPress the [OK] button on the remote.The station for the program service name beingdisplayed is received.Canceling the SNPP modePress the [DNPP] button on the remote.