Kenwood KDC-PSW9527 Instruction Manual

Also see for KDC-PSW9527: Service manual

Contents

58 | EnglishConnecting Wires to TerminalsTEL MUTEEXT.CONTP.CONTANT.CONT1234567812345678FRONT REAR AUX INCENTERSUBWOOFERATo KENWOOD disc changer/GSM hands free unit/External optional accessoryBattery wire (Yellow)Ignition wire (Red)FM/AM antennainputAntenna Cord (ISO)Antenna Conversion Adaptor(ISO–JASO) (Accessory3)To connect these leads, referto the relevant instructionmanuals.To connect the KENWOOD navigationsystem, consult your navigationmanual.Wiring harness(Accessory1)If no connections are made, donot let the wire come out fromthe tab.Power control/ Motor antennacontrol wire (Blue/White)TEL mute wire (Brown)Connect either to the power control terminalwhen using the optional power amplifier, or tothe antenna control terminal in the vehicle.Connect to the terminal that is groundedwhen either the telephone rings or duringconversation.A–7 Pin (Red)A–4 Pin (Yellow)Connector AConnector BFuse (10A)See next pageTo External Display/Steering remoteBFront right output (Red)Front left output (White)Rear right output (Red)Rear left output (White)AUX right input (Red)AUX left input (White)External amplifier control wire(Pink/ Black) To "EXT.AMP.CONT." terminal of the amplifierhaving the external amp control function.A BSubwoofer output(Navy Blue)KDC-PSW9527 Center output(Navy Blue)Subwoofer output(Black)KDC-W9027 —Subwoofer rightoutput (Red)KDC-W8027 Subwoofer leftoutput (White)