Kenwood KDC-PSW9527 Instruction Manual

Also see for KDC-PSW9527: Service manual

Contents

16 | EnglishGeneral featuresThe text display in the Lower text displaypartIn Tuner sourceInformation DisplayKENWOOD Logo "LOGO"Clock "CLOCK"Spectrum Analyzer & Clock "S/ANA+CLOCK"Radio text "R-TEXT"Date "DATE"In CD & External disc sourceInformation DisplayKENWOOD Logo "LOGO"Clock "CLOCK"Spectrum Analyzer & Clock "S/ANA+CLOCK"Disc title "DISC-TITLE"Track Title "TRACK-TITLE"Disc name "DNPS"Date "DATE"In MP3/WMA sourceInformation DisplayKENWOOD Logo "LOGO"Clock "CLOCK"Spectrum Analyzer & Clock "S/ANA+CLOCK"Song title & Artist name "TITLE/ARTIST"Album name & Artist name "ALBUM/ARTIST"Folder name "FOLDER NAME"File name "FILE NAME"Date "DATE"In StandbyInformation DisplayKENWOOD Logo "LOGO"Clock "CLOCK"Date "DATE"In Auxiliary input sourceInformation DisplayKENWOOD Logo "LOGO"Clock "CLOCK"Spectrum Analyzer & Clock "S/ANA+CLOCK"Date "DATE"• If 'Dual Zone System' (page 24) is turned ON while thespectrum analyzer is displayed, the spectrum analyzerdisappears from the display.• If the Disc title, Track title, Song title & Artist name, orAlbum name & Artist name is selected when the discwhich does not have Disc title, Track title, Song title,Album name, or Artist name is played, Kenwood Logoare displayed.Display:ASide Graphic Display SwitchingSwitching the Side graphic Display.1 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "DISP" isdisplayed above the [3]/ [4] button.Refer to 'Notes on Multi-function Key System'(page 10).2 Enter display control modePress the [3]/ [4] ("DISP") button.3 Select the display modePress the [2] ("MODE") button.Select the "Display:A" display.4 Enter display control modePress the [4] ("SIDE") button."Side Graphic" is displayed.5 Select the side graphic displayPress the [4] or [¢] button.Each time the button is pressed the side graphicdisplay switches as shown below.Side graphic displayText + SourceGraphic 1…Graphic 3Spectrum analyzer 1…Spectrum analyzer 4Blank6 Exit display control modePress the [6] ("RTN") button.• The setting of this function is available while "Display :A" is selected for the Display mode.