English | 49DSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI: ON" LED flashes."DSI: OFF" LED OFF.Selectable IlluminationSelecting the button illumination color as greenor red.Display Setting"Button: Red" The illumination color is red."Button: Green" The illumination color is green.Triangle indicator settingSets the blinking mode during triangle indicatorsystem adjustment (such as audio control, audiosetup, multi-key system setup).Display Setting"TRIAGL Blink:ON" The Triangle indicator blinks."TRIAGL Blink:OFF" The Triangle indicator does not blink.Font Type SelectSelecting the display font.1 Select Font Type Select ModePress the [FM] or [AM] button.Select the "Font Select" display.2 Select the fontPress the [4] or [¢] button.DimmerDimming this unit’s display automatically whenthe vehicle light switch is turned ON.Display Setting"Dimmer: ON" The display dims."Dimmer: OFF" The display doesn’t dim.OFF Wait Time SettingSetting the time until the faceplate hideoperation starts after the power is turned OFF.The faceplate can be removed only during the settime period.Display and Setting"Off Wait : 0sec"…"Off Wait : 3sec" (Original setting)…"Off Wait : 25sec"In Standby modeEject angle settingThis function sets the opening and closingoperation of a panel when a disc is inserted andwhen it is ejected.Display Setting"Eject ANG: Slope" Opens and closes the panel while maintainingthe angle of the control panel to the set angle."Eject ANG: Level" Opens and closes the panel after setting theangle of the control panel to the horizontalposition.