Keysight B2900 User’s Guide, Edition 5 5-21Front Panel OperationsTo Set Source OutputThe Sweep dialog box opens.2. In the Ch field, set the channel to which the setting change is applied.3. Set BEST, AUTO, or FIXED in the Sweep Ranging field. For details, see“Sweep dialog box” on page 4-29.4. To apply the settings, press Apply.To apply the settings and close the dialog box, press OK.To cancel the setting change, press the Cancel/Local key.To Set Sweep Direction1. Press the Config > Source > Sweep function keys.The Sweep dialog box opens.2. In the Ch field, set the channel to which the setting change is applied.3. Set UP or DOWN in the Sweep Direction field. For details, see “Sweep dialogbox” on page 4-29.4. To apply the settings, press Apply.To apply the settings and close the dialog box, press OK.To cancel the setting change, press the Cancel/Local key.To Set Source Output Value after Sweep1. Press the Config > Source > Sweep function keys.The Sweep dialog box opens.2. In the Ch field, set the channel to which the setting change is applied.3. Set START VALUE or END VALUE in the Output after Sweep field. Fordetails, see “Sweep dialog box” on page 4-29.4. To apply the settings, press Apply.To apply the settings and close the dialog box, press OK.To cancel the setting change, press the Cancel/Local key.
