3-20 Keysight B2900 User’s Guide, Edition 5InstallationConnecting a DUTCAUTION Maximum voltage and currentThe test fixture and adapters must be used under the following limitations to preventdamage.Keysight N1294A-001: 250 V maximum, 42 V maximum for connectingN1295AKeysight N1294A-002: 250 V maximum, 42 V maximum for connectingN1295AKeysight N1295A: 42 V, 1.05 A maximumUsing the 16442B Test FixtureKeysight 16442B is a test fixture which has six triaxial connectors forsource/measure unit (SMU), the GNDU connector for the ground unit of aparameter/device analyzer, the Intlk connector for the interlock control, and sixcoaxial connectors for other instruments. See Keysight 16442B User’s Guide fordetails and accessories of the 16442B.Requirements • Keysight 16442B test fixture furnished with pin clip wire, pin plug wire, etc.• Keysight N1294A-001 banana to triaxial adapter for 2-wire connections• Keysight N1294A-002 banana to triaxial adapter for 4-wire connections• Triaxial cable, 2 ea. for 2-wire connections, and 3 ea. for 4-wire connectionsNOTE Shielding16442B is equipped with a cover. To minimize the effect of ambient noise, close thecover when performing measurements.CAUTION Maximum voltage and currentThe test fixture and adapters must be used under the following limitations to preventdamage.Keysight N1294A-001: 250 V maximum, 200 V maximum for connecting16442BKeysight N1294A-002: 250 V maximum, 200 V maximum for connecting16442BKeysight 16442B: 200 V, 1 A maximum for SMU input
