Keysight B2900 User’s Guide, Edition 5 6-7Function DetailsPulse OutputPulse OutputThe source/measure unit SMU can apply the pulsed voltage or current. Figure 6-2shows a pulsed sweep output example. For a pulsed bias output, focus the shape of apulse only.To Control Pulse Output/Measure TimingThe pulse output and measurement timing can be controlled by the followingparameters. See Figure 6-2.1. Source delayThe source delay time is defined as the time from trigger to start of a sourceoutput.2. Measure delayThe measurement delay time is defined as the time from trigger to start of ameasurement.3. Pulse delayThe pulse delay time is defined as the time from the start of a source output tothe start of a pulse (peak) output.4. Source waitThe source wait time is defined as the time the source channel cannot change theoutput value after the trailing edge of a pulse.5. Measure waitThe measurement wait time is defined as the time the measurement channelcannot start measurement after the trailing edge of a pulse.6. Pulse widthThe pulse width is the time from the start of a pulse output to the end of a pulse(peak) output. However, it is strictly defined as the time from 10 % of peak levelat the leading edge to 90 % of peak level at the trailing edge. The availablevalues are 50 s to 100000 s.
