212 Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide15 Mask Testing:CHAN1:RANG +4.00E+00;OFFS +0.0E+00;COUP DC;IMP ONEM;DISP 1;BWL 0;INV 0:CHAN1:LAB "1";UNIT VOLT;PROB +1.0E+00;PROB:SKEW +0.0E+00;STYP SING:CHAN2:RANG +16.0E+00;OFFS +1.62400E+00;COUP DC;IMP FIFT;DISP 0;BWL 0;INV0:CHAN2:LAB "2";UNIT VOLT;PROB +1.0E+00;PROB:SKEW +0.0E+00;STYP SING:CHAN3:RANG +40.0E+00;OFFS +0.0E+00;COUP DC;IMP ONEM;DISP 0;BWL 0;INV 0:CHAN3:LAB "3";UNIT VOLT;PROB +1.0E+00;PROB:SKEW +0.0E+00;STYP SING:CHAN4:RANG +40.0E+00;OFFS +0.0E+00;COUP DC;IMP ONEM;DISP 0;BWL 0;INV 0:CHAN4:LAB "4";UNIT VOLT;PROB +1.0E+00;PROB:SKEW +0.0E+00;STYP SING:EXT:BWL 0;IMP ONEM;RANG +5E+00;UNIT VOLT;PROB +1.0E+00;PROB:STYP SING:TIM:MODE MAIN;REF CENT;MAIN:RANG +50.00E-09;POS +0.0E+00:TRIG:MODE EDGE;SWE AUTO;NREJ 0;HFR 0;HOLD +60E-09:TRIG:EDGE:SOUR CHAN1;LEV -75.00E-03;SLOP POS;REJ OFF;COUP DC:ACQ:MODE RTIM;TYPE NORM;COMP 100;COUNT 8;SEGM:COUN 2:DISP:LAB 0;CONN 1;PERS MIN;SOUR PMEM1:HARD:APR "";AREA SCR;FACT 0;FFE 0;INKS 1;PAL NONE;LAY PORT:SAVE:FIL "mask_0":SAVE:IMAG:AREA GRAT;FACT 0;FORM NONE;INKS 0;PAL COL:SAVE:WAV:FORM NONE:MTES:SOUR CHAN1;ENAB 1;LOCK 1:MTES:AMAS:SOUR CHAN1;UNIT DIV;XDEL +3.00000000E-001;YDEL +2.00000000E-001:MTES:SCAL:BIND 0;X1 +0.0E+00;XDEL +1.0000E-09;Y1 +0.0E+00;Y2 +1.00000E+00:MTES:RMOD FOR;RMOD:TIME +1E+00;WAV 1000;SIGM +6.0E+00:MTES:RMOD:FACT:STOP 0;PRIN 0;SAVE 0end_setupHow is mask testing done?InfiniiVision oscilloscopes start mask testing by creating a database that is 200 x640 for the waveform viewing area. Each location in the array is designated aseither a violation or a pass area. Each time a data point from a waveform occurs ina violation area a failure is logged. If Test All was selected, every active analogchannel is tested against the mask database for each acquisition. Over 2 billionfailures can be logged per-channel. The number of acquisitions tested is alsologged and displayed as "# of Tests".The mask file allows greater resolution than the 200 X 640 database. Somequantization of data occurs to reduce the mask file data for display on-screen.
