Save/Recall (Setups, Screens, Data) 18Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide 237When available, the Increment softkey can be used to enable or disableautomatically incremented file names. Auto increment adds a numeric suffix toyour file name and increments the number with each successive save. It willtruncate characters as necessary when the file name length is at maximum andmore digits are required for the numeric portion of the file name.Recalling Setups, Masks, or Reference Waveforms1 Press the [Save/Recall] key.2 In the Save/Recall Menu, press Recall.3 In the Recall Menu, press Recall:, then, turn the Entry knob to select the type offile you want to recall:• Setup (*.scp) — See “To recall setup files" on page 237.• Mask (*.msk) — See “To recall mask files" on page 238.• Reference Waveform data (*.h5) — See “To recall reference waveform files froma USB storage device" on page 238.You can also recall setups and mask files by loading them using the File Explorer.See “File Explorer" on page 251.You can also configure the [Quick Action] key to recall setups, masks, or referencewaveforms. See “Configuring the [Quick Action] Key" on page 262.To recall setup filesSetup files can be recalled from one of 10 internal (\Keysight Flash) locations orfrom an external USB storage device.1 Press [Save/Recall] > Recall > Recall:; then, turn the Entry knob to select Setup(*.scp).2 Press the softkey in the second position and use the Entry knob to navigate tothe file to recall. See “To navigate storage locations" on page 236.3 Press the Press to Recall softkey.NOTE You can use a connected USB keyboard instead of using the Spell (and other) characterediting softkeys.
