241Keysight InfiniiVision 2000 X-Series OscilloscopesUser's Guide19 Print (Screens)To print the oscilloscope's display / 241To set up network printer connections / 242To specify the print options / 244To specify the palette option / 244You can print the complete display, including the status line and softkeys, to aUSB printer or a network printer when the DSOXLAN LAN/VGA module isinstalled.The Print Configuration Menu is displayed when you press the [Print] key. The printoption softkeys and the Press to Print softkey are ghosted (not available) until aprinter is connected.To print the oscilloscope's display1 Connect a printer. You can:• Connect a USB printer to either the USB port on the front panel or therectangular USB host port on the rear panel.For the most up-to-date listing of printers that are compatible with theInfiniiVision oscilloscopes, please visitwww.keysight.com/find/InfiniiVision-printers.• Set up a network printer connection. See “To set up network printerconnections" on page 242.2 Press the [Print] key on the front panel.3 In the Print Configuration Menu, press the Print to softkey; then, turn the Entryknob to select the desired printer.
