98 Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide6 Digital ChannelsTo display digital channels as a busDigital channels may be grouped and displayed as a bus, with each bus valuedisplayed at the bottom of the display in hex or binary. You can create up to twobuses. To configure and display each bus, press the [Digital] key on the front panel.Then press the Bus softkey.Next, select a bus. Rotate the Entry knob, then press the Entry knob or theBus1/Bus2 softkey to switch it on.Use the Channel softkey and the Entry knob to select individual channels to beincluded in the bus. You can rotate the Entry knob and push it or push the softkeyto select channels. You can also press the Select/Deselect D7-D0 softkey to includeor exclude groups of eight channels in each bus.If the bus display is blank, completely white, or if the display includes "...", youneed to expand the horizontal scale to allow space for the data to be shown, oruse the cursors to display the values (see “Using cursors to read bus values" onpage 99).The Base softkey lets you choose to display the bus values in hex or binary.The buses are shown at the bottom of the display.
