236 Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide18 Save/Recall (Setups, Screens, Data)To navigate storage locationsWhen saving or recalling files, the softkey in the second position of the Save Menuor Recall Menu, along with the Entry knob, are used to navigate to storagelocations. The storage locations can be internal oscilloscope storage locations (forsetup files or mask files) or they can be external storage locations on a connectedUSB storage device.The softkey in the second position can have these labels:• Press to go — when you can push the Entry knob to navigate to a new folder orstorage location.• Location — when you have navigated to the current folder location (and are notsaving files).• Save to — when you can save to the selected location.• Load from — when you can recall from the selected file.When saving files:• The proposed file name is shown in the Save to file = line above the softkeys.• To overwrite an existing file, browse to that file and select it. To create a new filename, see “To enter file names" on page 236.To enter file namesTo create new file names when saving files to a USB storage device:1 In the Save Menu, press the File Name softkey.You must have a USB storage device connected to the oscilloscope for thissoftkey to be active.2 In the File Name Menu, use the Spell, Enter, and Delete Character softkeys toenter the file name:• Spell — press this softkey and turn the Entry knob to select the character atthe current position.• Enter — press this softkey to enter characters and move the cursor to the nextcharacter position. Pushing the Entry knob is the same as pressing the Entersoftkey.• Delete Character — press this softkey to delete the character at the currentposition.
